Damp Proofing

How to Do DIY Damp Proofing and the Cost of Materials

The cost of damp proofing is not as high as you might imagine; a few materials and some knowhow will keep your home safe and your property in good repair, free from the risk of mould and other problems caused by damp and condensation.

Is DIY Damp Proofing Easy?

In many cases simply painting with anti damp paint can give you protection from dampness especially in cellars and basements, or in baths where condensation and humidity build up. This is the easiest DIY damp proofing and also the quickest.

Other materials can be used somewhat quickly and easily if you have a bit of knowledge of how to maintain your home. Plasterboard for the ceilings or walls can be used that have anti damp properties, and these damp proofing materials are relatively inexpensive and easy to install with just a few tools and a bit of help. These are good to use when you’re remodelling or refinishing your basement or cellar where you may have more damp problems than usual.

What Materials Are Needed, What do They Cost, and Where to Buy Them?

Anti damp paint is available from just about any hardware store or home improvement store, or you can buy it online at amazon.com or other retailers. A 750ml bucket of anti damp paint may cost around £12.00; a 5 litre bucket may cost around £32.50 and is enough to cover an entire room or two. You may need to cover these paints with another paint of a colour of your choosing since more anti damp paints are simple white, although you may find some in other colours that are just as pleasing.

Other damp proofing materials such as plasterboard for roofs and walls or membranes behind your materials can be purchased online; try safeguardstore.co.uk. Rolls of membranes may cost around £300 and can be used for an entire room or for use outside when covering the foundation. Measure your room to be covered or the outside foundation before ordering so you know you have enough. Remember that the cost of damp proofing materials is always much less than the cost of repairing your home after damp and mould have caused damage to those materials.

How to Do the Damp Proofing

Anti damp paint is applied like any other paint; you need to treat and clean the walls and surfaces before you paint. If you have mould build-up, this needs to be cleaned thoroughly and the surface needs to dry before you can apply paint. You may also need to do some sanding and other prep work before you paint.

Membrane and plasterboard may be a bit trickier to apply but membrane will go behind the walls and a sealant will cover it. The water is drained through the membrane before it can collect on walls, and plasterboard will not allow for condensation to seep through. A baseline mesh is applied and then another coating of membrane over this, for the most protection against damp walls. Each layer is sealed and then the plasterboard is applied over this. Membranes are used for cellars and basements but also for exterior areas such as the foundation of a home.

While DIY damp proofing may sound complicated, it can be very simple. However, if you think that damp proofing DIY is more than you can handle with your knowhow as to home repair and improvement, call a professional that will handle the job for you. This will ensure your home is in good repair and that the job is done properly to protect your materials from mould and other build-up.

Posted by admin - June 16, 2012 at 10:39 am

Categories: Damp Proofing   Tags: , , , ,

Damp Proofing – Complete Guide Inc Costs and Products

Damp proofing is a type of construction that prevents moisture from going through the walls and entering interior space.  Dampproofing is done by waterproofing the foundational walls of a building by creating a horizontal barrier in the wall.  If the damp proof is done correctly, it will keep moisture from rising through the structure by capillary action.

DIY Damp Proofing Costs v Professional Costs

DIY damp proofing costs means how much it would cost if you do it yourself rather than going to a professional.  If you are not sure exactly how to do a damp proofing injection, but feel you will save money doing it yourself, you should try to find a professional who will come and look at your walls or floors without any charge.  They should give you an estimate on the damp proofing cost if you were to do it yourself or the cost if they were to do the damproofing for you.  Until now, the cost of getting multiple meters of Damp Proof coursing in your house has been extremely high.  This is because of how difficult high pressure injections are, and the equipment is expensive.  We recommend you have a professional who does a lot of cellar damp proofing or wall damp proofing because of how hit or miss this project can be.  You will save money by going to a professional because they will buy the right products and will get the project done correctly the first time.

Types of Damp Proofing Products

Now that you are no longer saying to yourself, “what is damp proofing?” you are probably wondering what the different types of damp proof coursing products are.  One of the easiest to use products that are also effective is DPC creams.  This product is quick and easy to install whether you are damp proofing a cellar or a wall, because all you do is drill the holes, blow out the dust and inject the cream.  People also like using this product because all you need to use is the pressure of your hand.

What is a Damp Proofing Injection?

Above we talked about a DPC cream that is easy to use and that can be injected, but what is injection damp proofing may be your next question.  The damp proofing injection is what you insert into the area that has rising damp.  The injection, whether you are damp proofing a cellar or you are damp proofing basements, should stop the rise of this damp.  What you will do is drill a hole into the area of the damp rise and then inject the product that either you or the professional is using to end the problem.

Tips for Damp Proofing Walls & Floors

Tips for damp proofing walls and damp proofing floors can be found either online or by talking to a professional.  By searching online you can read reviews on certain companies, DPC creams and other damp proofing products.  By reading these reviews you will be more likely to call the best damp proofers near your location, or if you are doing it yourself, you will be more likely to buy the best creams and products available.  These tips will include how to do an injection damp proofing, a chemical damp proofing or even how to damp proof wallpaper.  You will not regret doing research and reading up on the best tips and advice for damp proofing.  You will actually be glad you did when you save money and use the number one professionals in the market.

Tips for Damp Proofing Cellars and Basements

If you have never done a damp proofing before but would like some tips for damp proofing cellar and damp proofing basement techniques, you should look into the nearest professional company to your location.  Going to a professional the first time you need to damp proof is a smart idea because you know that they are experienced in damp proofing.  Basement damp proofing is one of the more difficult to do because it is so close to the ground and comes in contact with water more often.  Yes, we understand that most people feel that they will save more money by doing it themselves, but with damp proofing this is not the case.  You should hire a professional, at least the first time it needs to be done, because you can then watch what they do and learn the technique so next time you can do it yourself.

If you find yourself asking “how much is damp proofing?” a great tip, if you are going to damp proof yourself, is to get the dutch damp proofing product.  This is a very effective, affordable product that eliminates and controls problems caused by dampness.  This damp proofing product is known as the Schrijver systeem.  This system will help you get a dry, healthy living environment along with lowering your heating bills.  It is one of the best damp proofing systems and we highly recommend that you use it if you are going to damp proof yourself.

Are You Entitled to a Damp Proofing Grant in the UK?

Damp proofing grants are common in the UK depending on the location.  A renovation grant is often offered so you can improve and/or repair your home to ensure safety for you and your family.  There are certain qualifications you must meet to get this grant.  You are eligible for this grant if your dwelling falls below the fitness standard because the grant will be given if the council of environment officers approve the renovation.  You may also qualify if you are a landlord with a freehold and the dwelling is needed on a residential basis.  Another example of when someone may qualify for the grant is if they are a tenant who is liable under the terms of the lease to carry out this action.  You must show, however, that this residence that needs fixing has been your main residence for the past three years to get the grant.

Posted by admin - June 12, 2012 at 11:11 pm

Categories: Damp Proofing   Tags: , , , , , ,

Damp Proof Membrane Guide – Liquid, Epoxy & Visqueen Usage

Whether you need to damp proof your floor to prevent rising through the ground, damp proof course to keep damp from rising between layers of brickwork, do a tank membrane to stop water from penetrating through the walls of underground structures or you need to use lath or meshed membranes to fix walls that have already been damped, the damp proof membrane guide is right for you.

Types of damp proof membrane

Depending on what you need to fix will depend on what type of damp proofing you will need to do.  The epoxy damp proof membrane is a bi-component, light odour, solvent free membrane that creates resistance to residual moisture in floors made of concrete.  Liquid damp proof membrane dries clear, so if you want a coloured finish we recommend that you apply two coats.

Damp Proof Membrane Thickness

The damp proof membrane thickness will vary depending on which type of membrane you are using and what type of project you are doing.  If you are doing a damp proof membrane for walls, you can determine how thick the wall needs to be depending on what the wall is facing.  If the wall is facing brick mortar then it will absorb a good amount of water.  You can make the wall thicker by applying an external facing of say rendering or slate hanging, or by building a wall cavity.

Liquid Damp Proof Membrane

There are different types of liquid damp proof membrane techniques including visqueen damp proof membrane, ECS epoxy floor coating, Drybase Liquid Applied DPM, Vandex BB75, and Vandex Unimortar 2.  Each of these can directly be applied to a damp floor, creating a damp proof membrane floor barrier.

Damp Proof Membrane for Concrete Floors

If you are working on a concrete floor, you can also use liquid damp proof membrane concrete floor techniques. Concrete floor issues often arise if the floor is built in a damp ground.  Damp proofing is very common for concrete floors because of how often damp rising through concrete floors takes place.  Often times when a damp proof membrane concrete floor technique is done to concrete floors it is done too thin.  So, you want to make sure you or the professionals do the damp proof membrane properly.  Concrete floor problems are tricky to fix, so it is important that you make sure it is done correctly the first time.

Damp Proof Membrane for Walls

A damp proof membrane installation guide can be bought for different situations.  Whether you need to do a damp proof membrane walls or floor technique, the installation guide will give you instructions on what to do.  In simple, you drill a hole, get rid of the dust and then insert the liquid or cream of your choice.

Epoxy & Visqueen Damp Proof Membrane Manufacturers Installation Tips

If you are interested in damp proofing a floor using epoxy and visqueen, you can find installation tips online or by asking a professional.  Concrete is a porous substance so water and moisture can easily work their way up the substance creating mould in your home.  No one wants this in their home, so it is important that you get it taken care of right away.  Start by removing as much moisture as possible by putting a dehumidifier in the room.  Then, you should seal all cracks in the floor using a concrete sealant caulk.  Next, you should make sure no air can be let in the room by applying a foam sealant on all wall openings.  To your dry concrete floor you should then place the epoxy two-part sealer. Then, install the gutters that will allow water to flow under the concrete floors and away from the house.

Posted by admin - June 11, 2012 at 10:41 pm

Categories: Damp Proofing   Tags: , , , , , , , ,

Damp Proof Course & Costs in the UK

Damp proofing is the term used to describe waterproofing the area around a home or building to protect it from excess moisture and leaking into the foundation in the house.  Many people have started to damp proof their homes and older buildings in order to prevent future problems and health diseases that can result from damp basements.

What is a Damp Proof Course

A damp proof course is material, most of the time made of silicon that is laid right under the foundation of a house in order to either fix rising damp or to prevent moisture damage to a house.  These damp proof courses are put in place so that excess unwanted moisture does not seep in to the buildings through floors or walls.  This excess moisture does not only cause extreme damage to homes, but it can also cause many health problems to those people living in the house or anyone exposed to the harmful moisture.  Chemical damp proofing is the most popular type of damp proofing course.  Depending on the amount of damage that a specific house has, the specific type of damp proofing will change.

What Does a Damp Proof Course Cost in the UK

The price of a damp proofing course varies depending on the amount of damage that a house has.  Damp proofing is one of the largest undiagnosed problems in the country, and so most of the time the problem goes unnoticed for months.  The amount of damage that a person has often depends on how long they have let the problem go.  This can add onto the damp proofing cost extensively over time.  Damp proof course injections in the UK can cost anywhere from £20 to £30.  Again, it all depends on the amount of damage that a building has gone through.  Many people choose to offset the damp proof course cost by damp proofing their yards by themselves, but this is not something that is promoted because of all the things that can go wrong.  In order to save yourself a lot of time and money, it is important to stop the damage as soon as possible.

Use the Best Damp Proofing Course Contractor in Your Area

In order to find the best prices and the best workers, it is important to research damp proofing.  The UK has many contractors in areas all over the country that have provided proven successful results when it comes to damp proofing uk.  If you catch the problem early, you can significantly reduce damp proofing costs uk.  The UK is the leading country in damp proofing materials.

Posted by admin - June 8, 2012 at 10:33 pm

Categories: Damp Proofing   Tags: , , ,

Buy Johnstones Damp Proof Paint for Internal Walls

Using a damp proof paint will allow you to protect your internal walls from moisture build-up and condensation, which in turn protects your home from mould and other damage. This is one of the best ways homeowners and property owners can protect their property and avoid costly repair and restoration bills down the road.

What is Damp Proof Paint

Because paint is a liquid when adhered, it often holds moisture when there is an excess in the air. Damp proof paint is made of different materials that dry to a harder finish than normal paint, so it’s less porous and therefore less likely to hold moisture and hydration. Because it does not provide a hospitable environment for moisture, you’re less likely to have a problem with dampness with you choose damp proof paint for internal walls. It provides a barrier between moisture in the air and the materials of your home so that drywall and wood are protected from moisture and mould. This is also one of the easiest and most economical ways to protect against moisture build-up in the home.

Preparing Walls for Damp Proof Paint

If you already have mould build-up, you need to clean this thoroughly and allow it to dry before you paint. Use a space heater to dry your walls quickly when you’re ready to apply damp proof paint for internal walls. You cannot apply this paint over mould as this will mean an uneven surface and poor paint job, and will also allow the mould to grow behind the walls. As with typical painting, sand and clean your wall surfaces so they’re smooth and ready for paint. If you notice excessive mould growth, call a contractor to check the walls of your home and ensure you don’t have mould behind the drywall.

Finding the Cheapest Johnstones Damp Proof Paint Online

To find the best choice for Johnstones damp proof paint, check online. Their anti-condensation paint in brilliant white can be used under other colours protection against condensation and for providing a barrier between moisture and your drywall. Johnstones Damp Proof paint is also good for use in the kitchen and bathroom and basement areas where you may have added moisture in the air from everyday household use. Any of the Johnstones line of anti damp and anti condensation paints will work well to protect your home and your building.

Posted by admin - June 8, 2012 at 7:49 pm

Categories: Damp Proofing   Tags: , ,