Damp Solutions

Guide to Treating Damp and a Range of Solutions

It’s imperative that you find damp solutions for your home when you have condensation or other moisture build-up in the house. If you allow moisture to build this can lead to mould and other damage to your building materials, which can be very expensive to repair down the road. There are damp solutions for every homeowner and many are very affordable, so there’s no reason to put off dealing with damp in the home.

Most Common Methods for Treating Damp

Many methods of treating damp simply involve gathering the moisture in the home and drying it out before it can settle onto walls and windows and become condensation. Damp crystals are easily available at home improvement or hardware stores, and they work as a very simple damp cure. Most come in small buckets or packets that simply need to be opened, placed in an unobtrusive area, and then replaced when those crystals dissolve or become solid.

The Top Three Damp Solutions

Other damp treatments include damp proof plaster you might use around the walls and windows. This type of plaster hardens more thickly than other solutions and doesn’t allow condensation or moisture to build up and won’t hold that moisture along its surface.

Damp proof plasterboard can also be used in the home so that the walls do not hold moisture as they often do during the humid summer months. This is often preferred when you are remodelling or renovating a basement or cellar as this is where a lot of moisture will be contained in the home.

Damp wall solutions include anti damp paint that also will not allow damp to collect on the walls and will not allow it to build. Anti damp paint dries harder and less porous than other paints so it is not as hospitable to damp and condensation.

Why the Damp Tramp from Amazon is so Popular

The Damp Tramp is small and convenient to use and helps in curing damp in just about any space. It will stop damp from forming in bedrooms, closets, and even sheds or cellars. This product simply absorbs the humidity in the home and is then disposed of when used up, with a refillable interior easily purchased. Many damp experts use the Damp Tramp for homes with constant humidity problems and when consistent damp removal is needed. It is unobtrusive so you can use it in the kitchen or bath or even a caravan to keep damp from forming and causing damage to structures, and to keep your environment more comfortable during humid summer months.

Dealing With Damp in the Home

If you have damp in your home, simple damp absorbers will help to absorb moisture and keep it from collecting on walls and in other areas such as around windows or even in fabrics. These simple damp traps absorb moisture in the air and collect it themselves so that it won’t collect elsewhere. Using anti damp paint is also good for damp walls treatment, although you want to inspect them and perform any damp repair that needs to be done first.

Penetrating Damp Solutions

Penetrating damp solutions are needed when water enters a building usually through leaking pipes and other pluming repair issues. These need to be addressed with penetrating damp treatment, typically by a professional that can pinpoint the area of a leak and then replace the pipes or cap off the leak as needed. You may also need to replace other fixtures in and around the areas of leaks as they may be damaged and may be allowing damp and moisture to enter the home.

Damp Proof Plasterboard for Walls and Ceilings

To stop damp from damaging your building materials, use damp proof plasterboard on the walls and ceilings, especially for basement and cellar areas and the bath, as these are the places in the home that hold the most damp. This type of plasterboard is thicker and less porous than standard drywall and will not allow moisture to build up. It will also suffer less damage when you have damp in the home. Changing to damp proof plasterboard is one of the best damp wall treatments you can choose, especially when you use anti damp paint and other damp away treatment methods in the home.

Call a professional when you cannot stop damp in your home from collecting and when you need damp inspection. He or she will have other solutions you might try, such as silicone damp proofing along the windows or suggestions for new insulation to keep moisture from building up in the home. This will ensure you stop damp as quickly as possible and protect your property from mould and other damage done by excess condensation.

Posted by admin - June 15, 2012 at 10:33 am

Categories: Damp Solutions   Tags: , , , , , ,

DampRid – Treatments Used by Damp Specialists

If you have damp in your home, you may want to call on a damp specialist to find the source of the problem, or you may first want to try DampRid products to reduce moisture and humidity in the air.

DampRid – a Leading Damp Solution Product Manufacturer

DampRid specializes in products that absorb moisture from the air around them, so that your home is more comfortable and you are less likely to see condensation on the walls.  Many damp specialists recommend DampRid products especially in areas such as closets, bathrooms or cellars.  Excess moisture in closest can ruin clothes and create a musty smell, and moisture in cellars can cause condensation along walls that may lead to mould build-up and other serious problems.  Using DampRid products in the bath will not allow steam from the showers to collect along baseboards or on the walls where it may damage the drywall and floor boards.

Types of Damp Treatments From DampRid

Once you start shopping for DampRid products you may notice may solutions offered and it’s best to simply choose one according to the area of the home in which you have damp.  A hanging moisture and odour absorber is good for closets as this can be placed easily on the closet bar and will help your clothes to stay fresh-smelling.  Larger tubs of DampRid moisture absorbers may be used in basements or cellars where you need to absorb a large amount of moisture and humidity.

Many DampRid products are refillable and have crystals that absorb moisture.  The crystals dissolve as they absorb liquid, and then can be flushed in the toilet.  These are most economical and work in all areas of the home.

DIY Damp Treatment Using Specialty Products From DampRid

DampRid’s Easy-Fill System Large Room Moisture Absorber (FG90) is one of the best choices for all-over moisture control.  This is one recommended by many damp specialists.  Because it’s refillable it’s also economical and easy to use; simply empty the pouch when it reaches the full line and toss the pouch in the trash, then fill the container with a new pouch of absorbent materials.

The Hanging Moisture Absorbed with Cedar Fragrance (FG80FC) is also good for closets, as the cedar scent keeps clothes smelling their best and also helps to eliminate the problem of moths and other pests.  This will also keep your clothes from smelling musty.

Posted by admin - June 13, 2012 at 11:31 pm

Categories: Damp Solutions   Tags: , ,

Damp Proofing Association – Registered Damp Proofing Specialists

When you need to damp proof your home, you want to use only damp proofing specialists.  Large fixes are often difficult to handle on your own, as a homeowner, and often require more than just cleanup and a paint job.  Consider the following.

Why Use a Damp Proofing Association Registered Company?

Damp proofing means more than just adding a few coats of anti damp paint to a basement or exterior foundation walls.  The right damp proofing specialists should survey your property and pinpoint areas of dampness and then offer the right solutions for your home, including moisture barriers and other specialized materials that discourage condensation from forming.  These barriers need to be installed behind your home, and an inspection for mould and other damage should be performed before installation.

The Damp Proofing Association has a code of conduct for their members and quickly handles complaints and concerns over their business practices, so you know you’re hiring the best professional when you choose one associated with the Damp Proofing Association.  Their members need to be specially trained in all areas of damp proofing and construction overall so as to perform only the best fixes that are necessary and that will address your home’s needs for anti damp and anti condensation.

Nationwide Damp Proofing Specialists

While each homeowner and business owner needs to make their own decision about the best damp proofing specialists they’ll use for their property, consider two companies that are members of the Damp Proofing Association in the UK.

Life Cote Group

Second Floor

145-157 St John Street



Phone: 0800 043 2096

Email: info@dampproofingnationwide.com

Abbott Damp Proofing


27 Gresham Close, Enfield. EN2 7AP

1000 North Circular Road, London. NW2 7JP

Phone:  0800 328 7080

Email:  enquiries@abbottdampproofing.co.uk

Posted by admin - June 12, 2012 at 11:22 pm

Categories: Damp Solutions   Tags: ,

Damp Proof Injection (DPC Injection) & Creams Explained

If you are a home owner that needs damp proofing done to your home but are not sure what the difference is between all of the cream options, you have come to the right place.  We will explain what a damp proof injection is and fill you in on which creams are the best.

What is a DPC Injection?

A DPC injection is a very easy way to repair rising damp in the walls of your home or business.  You can either call in the professionals to do the damp injection, or you can do it yourself.  Either way, if it is your house that is damaged, it is important that you understand what a damp injection is.  A DPC injection is done by drilling a hole in the damaged area, cleaning out all of the dust and filling the hole with the DPC injection cream.

How Does a Damp Proof Injection Work?

How does a damp course injection work?  These injections, if done correctly, work by using a water repellent made of silicone resin to fill the porous areas along a length of masonry wall.  They work by neutralising the charge of attraction of the masonry holes to water molecules. These modern creams are no longer made with a thickening agent because the creams are now thickened in a more effective way. The DPC injection cream is now being stiffened which then forms a 100% active damp proof treatment that moves great along the host during damp conditions.

Where to Buy Damp Course Injection Cream

You do not need to call in the professionals to get this DPC cream.  You can buy kits online at amazon or you can look in a local department store.  When you buy a kit, it will come with all of the tools you need to fix the problem successfully and at an affordable price. The kits are very easy to use, and if you have any questions most of them can be answered by using an online search engine.  Searching online is a great way to get fast answers.  There are many different kits available also, so you should read reviews on the different kits as well to see which work best and which ones have the highest ratings.  Damp proofing by damp injection is not cheap, so you do not want to have to do the damp proofing over again.

Posted by admin - June 10, 2012 at 10:36 pm

Categories: Damp Solutions   Tags: , , , ,

Damp Proof Cream – How to Treat & Remove Damp with Damp Proof Creams

Damp proofing is the term used to describe implementing a waterproofing layer, or membrane, in between the ground and the foundation of a house or building.  This membrane results in keeping moisture out of the home’s walls and floors in order to prevent damage to the house and unwanted illnesses due to excess moisture.  Excess moisture in the home can cause moulds to grow, bugs to congregate around the moisture area, and mites.  Damp proofing is effective in saving homes from any further damage, and actually making the home a safer and much healthier place to live in.  Although there are many options to choose from when it comes to how to treat damp areas in the home, damp proofing is the most effective and safest way to reduce the moisture in homes and buildings.

What is Damp Proof Cream?

There are many methods to choose from when you finally decide on damp proofing your home or building.  One of the methods that you can choose is called chemical damp proofing, which involves using liquid to form the membrane between the earth and the foundation of the home or building.  Another form is called solid damp proofing, which involves actually putting a layer in the ground to separate the two and keeping the moisture out of the floors and walls.  Both of these methods however, are very extensive and can be very expensive depending on the severity of the damp damage that has been done.  The longer the problem goes unnoticed, the higher the cost for these methods.  One method therefore that people have turned to is damp proof cream.  Damp proof cream is cream that is injected into the ground under the foundation through pre-drilled holes.  This damp proofing cream is cost efficient and effective in removing damp areas from the home.

How to Treat Damp With and Use Damp Proofing Cream

Damp proofing cream can be applied to homes in various ways.  One of the most popular ways to apply damp proofing cream is to inject the cream using a type of damp proofing gun into pre-drilled holes under the foundation of the house.  These injections are to be given on a regular basis and can significantly improve the moisture problem in your home, creating a layer under the foundation and keeping the moisture out of the floors and walls of the home.  Damp proof cream is the least expensive method of damp proofing and has provided proven results to customers.

Posted by admin - June 10, 2012 at 10:35 pm

Categories: Damp Solutions   Tags: , , ,

Damp Course Injection, Membrane, & Treatment Costs

Damp proofing is the term used in construction for a type of waterproofing applied to the exterior of buildings in order to prevent water from getting to the interior of the building.  Damp proofing is an excellent solution to a horrible problem, and can help in solving problems with rising damp and help prevent new problems from arising.

Types of Damp Course Solutions

Rising damp describes the action of moisture moving from the ground into the walls and floors of buildings.  Rising damp is often misdiagnosed and can become a huge problem for homes and businesses alike. There are many solutions to a damp course if the rising damp problem is found out in time.  One solution for fixing damp courses is to isolate the vulnerable materials in a building, such as interior finishes and timber from damp fabric.  Another solution to rising damp may be to lower features such as a patio or flowerbed below the damp line, allowing for more moisture to escape without ruining your home or business. The third and most effective solution for a large rising damp problem is to damp proof your home or business, or inject chemicals to waterproof the base of the building.  Damp course treatment is the most practical for long-term success.

What is a Chemical Damp Proof Course?

A chemical damp course is one type of the damp proof courses that you can choose.  A chemical damp proof course is liquid and is therefore a less invasive project than inserting a solid damp course.  A chemical damp proof course membrane is also much more practical because it is inserted by injection, and does not cause any long term effects to the property.  A chemical damp proof course involves injecting a silicon-based liquid into the ground around a building.  This silicon layer acts as a waterproof barrier between any moisture and the building.  One downside to a chemical damp proof course is that the liquid may not spread out evenly underground, causing some areas to be more protected from moisture than others.  Chemical damp proof courses are much easier to install than solid however, and require a very little amount of tools.

Damp Course Costs in the UK

Rising damp is a problem that often goes untreated for several years, causing the problem to escalate and become a lot worse than it was originally. The damp course cost can be very expensive, but it is important to remember that by leaving the problem untreated for a long length of time the problem will become worse and therefore more expensive.  Damp proof course injection treatments in London can cost anywhere from £20 to £30.  Damp proof courses can be expensive but in the end can save you from any further costs of damage.

Is a DIY Damp Course the Solution For You?

To avoid the cost of typical damp courses, many people opt for a DIY damp course, or a do it yourself course.  With the technology and tools involved in creating a damp course, it is easy to create one yourself for just a fraction of the cost of a big company coming in and doing it for you.  This is advised against because many times people create sloppy damp courses, causing them to have very little protection against moisture.  Most of the time DIY damp courses cause people to need to get an actual damp course installed later on, resulting in more time and money.  If installed properly however, DIY damp coursing can be cost efficient and can solve your problem.  For information on how to create your own DIY damp course, steps can be found online.

Posted by admin - June 9, 2012 at 8:38 pm

Categories: Damp Solutions   Tags: , , , , , , , ,

Basement / Cellar Damp Proofing – How to Tips & Solutions

Having a damp basement is not just uncomfortable; it can also be dangerous to your property. A damp basement may lead to mould build-up along the walls and even to cracks in the foundation, in extreme cases. Excess dampness makes enjoying your space difficult if not impossible, and should be addressed as soon as possible, and especially if you’re considering any type of construction or remodelling in your basement areas.

Why Dampness is Common in Basements and Cellars

Because foundations are made of solid cement, it’s easy to wonder why basements and cellars get damp and uncomfortable. It doesn’t seem likely that moisture would be able to seep through cement, but it does happen. The moisture may also seep into the home from any number of areas, and then typically settle in basements and cellars. When the air is moist and humid, that humidity needs to go somewhere and water falls downward, so it will collect in the basement and lower levels.

This is why waterproofing a basement is so vital; the moisture from the rest of the home will settle in this lowest of areas and then stay there, as it has nowhere else to go. Basements and cellars typically lack regular ventilation and areas around which the moisture may escape, such as windows, so it will settle along the walls and floors.

Basements and cellars are also perfect environments for dampness to settle. Light will evaporate moisture but basements and cellars get little if any sunlight, and may be without other light for most of the day. Think of how dark and dreary your basement or cellar is throughout the day and you may realise immediately why moisture collects in that area. As water falls and collects to a lower level, heat rises, so basements and cellars are without heat that also wicks away hydration and moisture. This makes it a perfect place for the moisture of the home to settle and to remain; basements and cellars are cool and dark, which is why they’re also typically moist and damp. If you’re concerned with how to damp proof a cellar or basement, there are a few solutions you might consider.

Basement and Cellar Damp Proofing Solutions

A professional contractor may offer a few solutions if you notice that your have a lot of moisture in the basement or cellar. They may install what is called a membrane system behind the wall, which gives the moisture a place to collect outside the wall rather than inside. This membrane system will also collect air behind the walls which in turn dries the moisture. They also provide protection against salt and other contaminants in the basement or cellar, are easy to install, and typically very affordable.

How to Damp Proof a Basement or Cellar Yourself

There are a few different ways you can eliminate much of the moisture in a basement or cellar by basement damp proofing on your own. A dehumidifier may be a good choice in many areas, and a sump pump should be used if you have basement flooding. These are simple ways of waterproofing a basement for everyday dampness and common moisture problems.

Other damp cellar solutions include damp proof paint which provides an environment that is unfriendly to moisture. This type of paint discourages moisture from collecting around its surface so that it cannot simply sit.

For severe cases of moisture build-up, call a professional for basement damp proofing. He or she can assess your area and determine the best solution for your building materials and for your level of moisture as well.

Posted by admin - June 8, 2012 at 3:50 pm

Categories: Damp Solutions   Tags: , , , , , , ,

Anti Damp Paint – Damp Proofing Paint for Damp Walls

Protecting your walls from dampness is vital for the life of your property. Moisture can lead to mould build-up and in turn, damaged drywall that needs replacing and even cracks in the foundation. Using an anti-damp paint is one good way to cut down on the dampness you may see especially along corners of walls and in dark areas where mould may be a danger.

One good aspect of using damp proofing paint is that it comes in the same colours as other paints so you don’t need to give up style for function in your home or business. The right paint for damp walls also goes on just as smoothly; most cannot even tell that it’s an anti damp paint by sight or touch. It is not particularly industrial looking and will not detract from your overall style. You can then use damp wall paint in your home, basement, or office and know that your space will look just as presentable as if you had used regular paint.

To prepare your space for damp paint, consider the following.

Tips for Using Damp Proof Paint

You need to prepare your surface as you would when painting any space. If your space already has mould growth, you need to scrub this with a light detergent and warm water, and then use a space heater to dry it before you paint. When there is mould build-up in walls, it’s also good to have a contractor look behind the walls to assess the damage. If there is mould build-up behind walls, the drywall and even the studs of the building may need to be replaced. In some cases the mould is simply on the outside, such as in very damp areas or tropical spaces, but it’s good to have this assessed before you paint.

Finding Damp Proof Paint Online

As with all types of paint, you want paint for damp walls according to the surface. If you’re painting a basement with exposed brick, you need paint for brick surfaces which is different than drywall paint. While colours are typically very true with anti damp paint, you may need two coats, and this will give your walls added protection against moisture. Shopping online will give you the best choices for colours and styles.

Choose the best tools for your anti damp job as well; rollers with thick nap are meant for surfaces with lots of nooks and crannies, such as that exposed brick. Edge brushes will keep you from spilling around edges and make your paint job look polished and professional; these too can be purchased online quickly and easily.

What is Anti Damp Paint

The materials used to make anti damp paint help to keep moisture from building up along walls. It has special moisture block elements that are not found in most other paints, which is why mould build-up is unfortunately too common in many buildings.

When painting over damp areas, you may need to consider other helps for keeping your area dry and manageable, and safe for your walls. A dehumidifier is good for many areas, and a sump pump can help in basements that are prone to flooding. Use a damp seal paint in all areas of the home that are prone to dampness, not just in the basement or areas where you’ve noticed mould build-up. Using paint for damp walls is also good in the bathroom even if you use an exhaust fan or keep windows open during showering. Everything you can do to eliminate excess moisture in your home will help your damp wall paint to work better.

Posted by admin - June 8, 2012 at 3:44 pm

Categories: Damp Solutions   Tags: , , , , ,